PATCHING 1. Use the applicator to force as much of the mixed material into the crack as possible. After the crack is filled, remove any excess material from the surface. 2. Place the previously fitted reinforcemant mesh so that it is centered over the crack. 3. Starting at one end, use the applicator to spread the remaining product over the mesh. Apply only enough material to cover the mesh; the thicker the coating the longer it will take to dry. CURING Allow Pond Patch to set, protected from moisture for 48 hours before refilling pond. Cold or damp conditions may increase setting time. SAFETY INFORMATION SKIN CONTACT: Wash affected skin thoroughly with soap and water. EYE CONTACT: Flush eyes with large amounts of water for 15 minutes. INGESTION: If swallowed give two glasses of water to drink. Consult a physician. INHALATION: Move subject to fresh air.