PREPARATION 1. Drain the pond or waterway to expose the surfaces to be repaired. 2. Clean and dry the area to be repaired. This is the most important step in the repair. Pressure washing is recommended. All dirt, debris and other contaminants should be completely removed before proceeding. 3. Place the reinforcement mesh so that it is centered over the crack and then cut the mesh to the appropriate length. When fitting is complete, temporarily set the mesh aside. MIXING Mix component 'A' with component'B' in equal quantities in the large container provided. Ensure that ingredients are completely mixed by scraping the sides and bottom of the container. The finished product should have a uniform gray color and smooth consistency throughout.